EasyManua.ls Logo

Nikon D810 - Page 502

Nikon D810
530 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
478
ADL bracketing 2 frames using selected value for one frame or 3
5 frames using preset values for all frames
Exposure lock Luminosity locked at detected value with A AE-L/
AF-L button
ISO sensitivity
(Recommended
Exposure Index)
ISO 64 – 12800 in steps of
1
/
3,
1
/
2, or 1 EV.
Can also
be set to approx. 0.3, 0.5, 0.7, or 1 EV (ISO 32
equivalent) below ISO 64 or to approx. 0.3, 0.5, 0.7,
1, or 2 EV (ISO 51200 equivalent) above ISO 12800;
auto ISO sensitivity control available
Active D-Lighting Can be selected from Auto, Extra high, High,
Normal, Low, or Off
Focus
Autofocus Nikon Advanced Multi-CAM 3500FX autofocus
sensor module with TTL phase detection, fine-
tuning, 51 focus points (including 15 cross-type
sensors; f/8 supported by 11 sensors), and
AF-assist illuminator (range approx. 0.5–3 m/1 ft
8in.9ft 10in.)
Detection range –2 – +19 EV (ISO 100, 20 °C/68 °F)
Lens servo Autofocus (AF): Single-servo AF (AF-S); continuous-
servo AF (AF-C); predictive focus tracking
automatically activated according to subject
status
Manual focus (M): Electronic rangefinder can be
used
Focus point Can be selected from 51 or 11 focus points
AF-area mode Single-point AF, 9-, 21-, or 51- point dynamic-area
AF, 3D-tracking, group-area AF, auto-area AF
Focus lock Focus can be locked by pressing shutter-release
button halfway (single-servo AF) or by pressing
A AE-L/AF-L button
Exposure

Table of Contents

Related product manuals