System Management
448
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
© 2021 Nokia.
Use subject to Terms available at: www.nokia.com
3HE 17358 AAAB TQZZA
Description This command specifies the minute to schedule a command. Multiple minutes of the hour can
be specified. When multiple minutes are configured, each of them will cause the schedule to
occur. If a minute is configured, but no hour or day is configured, the event will not execute.
If a minute is configured without configuring the month, weekday, day-of-month and hour
commands, the event will not execute.
See the month, weekday, day-of-month, and hour commands for more information.
The no form of this command removes the specified minute from the configuration.
Parameters minute-number — Specifies the minute to schedule a command.
Values 0 to 59 (maximum 60 minute-numbers)
all — Specifies all minutes.
month
Syntax month {month-number [..month-number] | month-name [..month-name] | all}
no month
Context config>system>cron>sched
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command specifies the month when the event should be executed. Multiple months can
be specified. When multiple months are configured, each of them will cause the schedule to
trigger. If a month is configured without configuring the weekday, day-of-month, hour, and
minute commands, the event will not execute.
See the weekday, day-of-month, hour and minute commands for more information.
The no form of this command removes the specified month from the configuration.
Parameters month-number — Specifies a month by number.
Values 1 to 12 (maximum 12 month-numbers)
all — Specifies all months.
month-name — Specifies a month by name.
Values january, february, march, april, may, june, july, august, september,
october, november, december (maximum 12 month names)
type
Syntax type {schedule-type}
Context config>system>cron>sched
To Next Page
Loading...
Need help?
General
Weight and Dimensions
