System Management
498
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
© 2021 Nokia.
Use subject to Terms available at: www.nokia.com
3HE 17358 AAAB TQZZA
view
Syntax view [checkpoint | rescue]
Context admin>rollback
Platforms 7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Mxp
Description This command displays the configuration settings saved in a rollback checkpoint or rescue
file, or the active operational system configuration.
Parameters checkpoint | rescue — Specifies the configuration file to view.
Values rescue — The rollback rescue file from the configured rescue
location.
latest-rb — The most recent rollback checkpoint file from the
configured rollback location, with the suffix *.rb.
checkpoint-id — The ID value of a specific rollback checkpoint file
from the configured rollback location with the suffix *.rb.x.
The range is 1 to 9 but the maximum value depends on the local and
remote max checkpoints. See local-max-checkpoints and remote-
max-checkpoints for more information.
local-max-checkpoints
Syntax local-max-checkpoints [1..50]
no local-max-checkpoints
Context config>system>rollback
Platforms 7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Mxp
Description This command configures the maximum number of rollback checkpoint files when the
rollback location is on the local compact flash.
Default 10
Parameters 1..50 — Specifies the maximum number of rollback checkpoint files.
remote-max-checkpoints
Syntax remote-max-checkpoints [1..200]
no remote-max-checkpoints
Context config>system>rollback
Platforms 7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Mxp
To Next Page
Loading...
