Nokia 7210 - Page 499

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
3HE 17358 AAAB TQZZA © 2021 Nokia.
Use subject to Terms available at: www.nokia.com
499
Description This command configures the maximum number of rollback checkpoint files that can be
saved on a remote device.
Default 10
Parameters 1..200 — Specifies the maximum number of rollback checkpoint files.
rescue-location
Syntax no rescue-location file-url
Context config>system>rollback
Platforms 7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Mxp
Description The location and filename of the rescue configuration is configurable to be local (on the
compact flash) or remote. The suffix “.rc” will be automatically appended to the filename when
a rescue configuration file is saved. Trivial FTP (tftp) is not supported for remote locations.
A valid rescue location must be configured before a rescue configuration is saved.
rollback-location
Syntax no rollback-location file-url
Context config>system>rollback
Platforms 7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Mxp
Description This command configures the location and generic filename of the rollback rescue
configuration file.
A rescue file can be saved locally on the compact flash or on a remote device. The file URL
must not contain a suffix, just a path/directory and filename. The suffixes for rollback
checkpoint files are “.rb”, ".rb.1", ..., ".rb.9" and are automatically appended to rollback
checkpoint files.
A valid rollback-location must be configured before a rollback save command is executed.
Parameters file-url — Specifies the local or remote file path for the rollback rescue configuration file.
Values file-url — local-url | remote-url
local-url — [cflash-id/] [file-path]
255 chars maximum, including cflash-id
directory length 99 characters maximum each
remote url — [{ftp://} login:password@remote-location] [file-path]
255 characters maximum
directory length 99 characters maximum each