Nokia 7210 - Page 655

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
3HE 17358 AAAB TQZZA © 2021 Nokia.
Use subject to Terms available at: www.nokia.com
655
uptime
Syntax uptime
Context show
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command displays the time since the system started.
Output The following output is an example of uptime information, and Table 89 describes the output
fields.
Sample Output
A:ALA-1# show uptime
System Up Time : 11 days, 18:32:02.22 (hr:min:sec)
A:ALA-1#
Failover Reason Displays a text string giving an explanation of the cause of the last
redundancy failover
If no failover has occurred, an empty string displays.
Boot/Config Sync
Mode
Displays the type of synchronization operation to perform
between the primary and secondary CSMs after a change has
been made to the configuration files or the boot environment
information contained in the boot options file (BOF)
Boot/Config Sync
Status
Displays the results of the last synchronization operation between
the primary and secondary CSMs
Last Config File Sync
Time
Displays the timestamp of the last successful synchronization of
the configuration files
Last Boot Env Sync
Time
Displays the timestamp of the last successful synchronization of
the boot environment files
Table 88 Output Fields: Synchronization (Continued)
Label Description
Table 89 Output Fields: System Timing
Label Description
System Up Time Displays the length of time the system has been up in days,
hr:min:sec format