Nokia 7210 - Page 663

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
3HE 17358 AAAB TQZZA © 2021 Nokia.
Use subject to Terms available at: www.nokia.com
663
Context show>system>script-control
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command displays script parameters.
Parameters script-name — Displays information for the specified script.
script-owner — Displays information for the specified script owner.
Output The following output is an example of script information, and Table 91 describes the output
fields.
Sample Output
7210SAS>show>system>script-control# script
===============================================================================
Script Information
===============================================================================
Script : test
Owner name : TiMOS CLI
Description : asd
Administrative status : enabled
Operational status : enabled
Script source location : ftp://*****:******@xxx.xxx.xxx.x/home/testlab_bgp
/test1.cfg
Last script error : none
Last change : 2015/01/07 17:10:03
===============================================================================
7210SAS>show>cron#
Table 91 Output Fields: Script
Label Description
Script Displays the name of the script
Owner name Displays the owner name of the script
Description Displays the description of the script
Administrative
status
Enabled — Administrative status is enabled
Disabled — Administrative status is disabled
Operational status Enabled — Operational status is enabled
Disabled — Operational status is disabled
Script source
location
Displays the location of the scheduled script
Last script error Displays the system time of the last error
Last change Displays the system time of the last change