5 Parameter
BU 0250 en-3021 153
Pos: 496 /Anleitungen/ Elektronik/F U und Starter/5. Parameter/ Parameterauflis tung (P000 ...)/P700- P799/Parameter P708 – Zus tand Digitaleingänge [ SK 2xxE-FDS] @ 12\mod_14672 97796182_388.docx @ 335690 @ @ 1
P708
Digital input status.
(Digital input status)
00000 ... 11111 (bin)
or
0000 ... FFFF
(hex)
Displays the status of the digital inputs in binary/hexadecimal code. This display can be used to
check the input signals.
Bit 1 = Digital input 2
Bit 2 = Digital input 3
Bit 5 = Digital input 6 (AIN1)
Bit 6 = Digital input 7 (AIN2)
Pos: 497 /Anleitungen/ Elektronik/F U und Starter/5. Parameter/ Parameterauflis tung (P000 ...)/P700- P799/Parameter P708 – Zus tand Digitaleingänge _Teil 2/2 [SK 1x0E, SK 2xxE, SK 2 xxE-FDS] @ 9\mod_1448441143299 _388.docx @ 266679 @ @ 1
First SK xU4-IOE (optional)
Bit 8 = 1: IO extension: Digital input 1
Bit 9 = 1: IO extension: Digital input 2
Bit 10 = 1: IO extension: Digital input 3
Bit 11 = 1: IO extension: Digital input 4
Second SK xU4-IOE (optional)
Bit 12 = 2: IO extension: Digital input 1
Bit 13 = 2: IO extension: Digital input 2
Bit 14 = 2: IO extension: Digital input 3
Bit 15 = 2: IO extension: Digital input 4
Bits 15-12 Bits 11-8 Bits 7-4 Bits 3-0
Minimum value
0000
0
0000
0
0000
0
0000
0
Binary
hex
Maximum value
1111
F
1111
F
1111
F
1111
F
Binary
hex
SimpleBox: The binary bits are converted to a hexadecimal value and displayed.
ParameterBox: The Bits are displayed increasing from right to left (binary).
Pos: 498 /Anleitun gen/Elektronik/F U und Starter/5. Parameter /Parameterauflis tung (P000 ...)/ P700-P799/Parameter P709 – Spann ung Analogeingang [SK 2 xxE-FDS] @ 12\mod_1467298035 781_388.docx @ 335725 @ @ 1
P709 [-01]
...
[-09]
Analog input voltage
(Analog input voltage)
-100 ... 100 % Displays the measured analogue input value.
[-01] = Analog input 1, function of analog input 1 integrated into the FI
[-02] = Analog input 2, function of analog input 2 integrated into the FI
[-03] = Ext. Analog input 1, AIN 1 of the first SK xU4-IOE I/O extension
[-04] = Ext. Analog input 2, AIN2 of the first SK xU4-IOE I/O extension
[-05] = Setpoint module, SK SSX-3A, see BU0040
[-06] = Analog function Dig. 2, analog function of FI digital input 2
[-07] = Analog function Dig. 3, analog function of FI digital input 3
[-08]= Ext. A. in. 1 2nd IOE, "External analog input 1 2nd IOE“, AIN1 of the second I/O -
extension (SK xU4-IOE) (= Analog input 3)
[-09] = Ext. A.in. 2 2nd IOE, "External analog input 2 2nd IOE“, AIN2 of the second I/O -
extension (SK xU4-IOE) (= Analog input 4)
Pos: 499 /Anleitun gen/Elektronik/F U und Starter/5. Parameter /Parameterauflis tung (P000 ...)/ P700-P799/Parameter P710 – Spann ung Analogausgang [SK 1 x0E, SK 2xxE, SK 2xxE-FDS] @ 2\mod_1346 932205766_388.doc x @ 43512 @ @ 1
P710 [-01]
[-02]
Analogue output volt.
(Analogue output voltage)
0.0 ... 10.0 V Displays the delivered value of analogue output.
[-01] = First IOE, AOUT of the first I/O extension (SK xU4-IOE)
[-02] = Second IOE, AOUT of the second I/O extension (SK xU4-IOE)
Pos: 500 /Allgemein/A llgemeingültige Module/---------Seitenumbruch kompakt --------- @ 13\mod_14763696959 06_0.docx @ 2265495 @ @ 1
To Next Page
Loading...
