Introduction
2‐2
P/N 397189E
E 2006 Nordson Corporation
BM200_EASY_GEAR
Area of Use
The system is designed for use in industrial areas.
When using in industrial areas and in small businesses, the system may
cause interference in other electrical units, e.g. radios.
Residual Risks
In the design of the unit, every measure was taken to protect personnel from
potential danger. However, some residual risks can not be avoided.
Personnel should be aware of the following:
S Risk of burns from hot material
S Risk of burns from hot system components
S Risk of burns when conducting maintenance and repair work for which
the system must be heated up
S Risk of burns when attaching and removing heated hoses
S Material fumes can be hazardous. Avoid inhalation
S Pinching parts of the body between heating punch and drum
S The safety valve may malfunction due to hardened or charred material.
Definition of Term(s)
The safety valve is also referred to as bypass and bypass valve in Nordson
literature.
To Next Page
Loading...
