Nordson BM 200 - Table of Contents

Table of Contents I
P/N 397189E
E 2006 Nordson Corporation
BM200_EASY_GEAR
Table of Contents
Safety 1‐1.................................................
Introduction 2‐1............................................
Intended Use 2‐1............................................
Unintended Use - Examples - 2‐1...........................
Area of Use 2‐2...........................................
Residual Risks 2‐2..........................................
Definition of Term(s) 2‐2......................................
Note on Manual 2‐3..........................................
Configuration Code 2‐4.......................................
ID Plate 2‐5..............................................
Essential Components 2‐6....................................
Model Variations and Options 2‐7...........................
Pressure Control 2‐7....................................
Exhaust Hood 2‐7......................................
Changeover System 2‐7.................................
High Drum Jacket for Cardboard Drums 2‐8................
Divided Base Plate for Pallet Conveyance 2‐8..............
Electrical Cabinet 2‐9......................................
Button Two‐hand Control and Pneumatic Switch 2‐10.........
Control System 2‐10.....................................
Key Switch Remote / Local and Indication Lamp Remote 2‐10..
Main Switch 2‐10........................................
Electrical Cabinet Ventilation 2‐10..........................
Electrical Connections 2‐11...............................
Week Timer (Accessory) 2‐12.............................
Door Lock 2‐12..........................................
Light Tower (Accessory) 2‐12.............................
Heating Punch 2‐13........................................
Melting Plates 2‐13......................................
Functioning 2‐14.............................................
Raising and Lowering Heating Punch 2‐14.....................
Deaerating Drum 2‐14....................................
Aerating Drum 2‐14......................................
Melting Process and Material Flow 2‐15.......................
Drive 2‐15.................................................
Heating and Temperature Control 2‐16........................
Undertemperature Interlock 2‐16...........................
Overtemperature Indication / Shutdown 2‐16................
Temperature Setback 2‐16................................