Installation
3‐2
P/N 397189E
E 2006 Nordson Corporation
BM200_EASY_GEAR
Storage
Do not store system outside! Protect from humidity, dust and extreme
temperature fluctuations (formation of condensation).
Setting Up
S For systems with divided base plate:
CAUTION: Risk of damage! Do not operate equipment until it is
screwed securely to the floor. Otherwise the descending punch
would lift the system off of the floor.
S Set up only in an environment that corresponds to the stated Degree of
Protection (Refer to Technical Data). Do not set up in a potentially
explosive atmosphere!
S Protect from vibration. Remove transport protection (if present).
S Ensure that there is sufficient free space around the system, especially
above it. Refer to Technical Data for dimensions.
Fig. 3‐1
To Next Page
Loading...
