Installation
3‐3
P/N 397189E
E 2006 Nordson Corporation
BM200_EASY_GEAR
Removing
1. Convey all material out of system and remove drum.
2. When system will not be used for longer periods of time, purge with
cleaning agent if necessary (Refer to Maintenance).
3. Wipe off sealing ring and clean melting plate (Refer to Maintenance).
4. Disconnect all lines to the system, and allow system to cool.
Disposal
When your Nordson product has exhausted its purpose and/or is no longer
needed, dispose of it properly according to local regulations.
To Next Page
Loading...
