Nordson BM 200 - Material Pressures and System Dimensions

Technical Data
8‐3
P/N 397189E
E 2006 Nordson Corporation
BM200_EASY_GEAR
Material Pressures
Motor/pump model (standard) bar MPa psi
Three‐phase AC motor with gear pump 5 to 100 0.5 to 10 72.5 to 1450
Note: Safety valve setting is decisive for maximum
outlet pressure. Factory setting:
35 3.5 507.5
Dimensions
System Drum diameter Min. drum height* Max. drum height*
BM 200 571 mm 830 930
* The switch rod must be adapted to the max. drum height (Refer to section Operation)
B 800
1730
2720
953*
1270*
Fig. 8‐1
Note: Dimensions with an asterisk (*) apply to models with an exhaust hood.