Installation
3‐4
P/N 397189E
E 2006 Nordson Corporation
BM200_EASY_GEAR
Exhausting Material Vapors
Ensure that material vapors do not exceed the prescribed limits. Always
observe the safety data sheet (MSDS) for the material to be processed.
If necessary, exhaust material vapors and/or provide sufficient ventilation of
the location of the system. On systems with exhaust hoods, material vapors
are suctioned directly at the drum.
NOTE: The exhaust hood must be connected to the customer's exhaust
device. Refer to Technical Data.
System without exhaust hood System with integrated exhaust hood
Customer's
Fig. 3‐2
To Next Page
Loading...
