Introduction
2‐4
P/N 397189E
E 2006 Nordson Corporation
BM200_EASY_GEAR
Configuration Code
The configuration code is engraved on the ID plate.
NOTE: An X indicates that the function or component was not ordered,
meaning that it is unavailable. An S indicates that the model deviates from
the configuration code. Such deviations are described in a supplement or a
system description.
Box Code Key
1 BM200 Series or unit designation
Equipment
2 Melting plate Drum aeration valve Exhaust hood
A Axial Automatic No
B Axial Automatic Yes
R Axial Manual No
C Axial Manual Yes
F Fine‐blade Automatic No
P Fine‐blade Manual No
G Smooth Automatic Yes
U Smooth Manual Yes
3 3 Operating voltage 400VAC, 3 Ph Y
4 400VAC, 3 Ph, Delta
5 480VAC, 3 Ph, Delta
4 K Hose connection 16 mm (
5
/
8
in) installed
8 mm (
5
/
16
in) included
M 20 mm (
3
/
4
in)
L 32 mm (1
1
/
4
in)
5 11 Pump type Gear, PR 6m1
12 Gear, PR 12m1
13 Gear, PR 12m2
14 Gear, PR 25m2
50 Gear, PU 15/85
51 Gear, PU 25/85
52 Gear, PU 35/85
53 Gear, PU 50/85
41 Piston pump, 42:1
42 Piston pump, 24:1
6 L Overtemperature
thermostat
150 ° C / 300 ° F
M 176 ° C / 350 ° F
H 230 ° C / 450 ° F
7 1 Number of hose
connections
1
2 2
Continued...
To Next Page
Loading...
