Maintenance
5‐2
P/N 397189E
E 2006 Nordson Corporation
BM200_EASY_GEAR
Daily Maintenance
The maintenance intervals are general guidelines based on experience.
Depending on the location of the system, production conditions and
operating time of the system, other maintenance intervals may prove
necessary.
Unit part
Activity Interval Refer to
Complete system External cleaning Daily Page 5‐4
Inspect for external damage Page 5‐4
Power cable Inspect for damage -
Air hoses Inspect for damage -
Displays and lamps Function check (test) Manual
Control System
Electrical cabinet ventilation Clean fan screens, clean or
replace filter
Daily, if dust
accumulation is
severe
Page 5‐4
Melting plate Check melting plate for
charred material, clean if
necessary
Every time the
drum is changed
Page 5‐7
Sensor Drum inserted Check sensor for material
residue or other impurities,
clean if necessary
-
Base plate Check base plate for material
residue or other impurities,
clean if necessary
-
Electrical motor Clean fan cover Daily, if dust
accumulation is
severe
Manual Motor
To Next Page
Loading...
