Nordson BM 200 - Options Configuration Details; ID Plate Information

Introduction
2‐5
P/N 397189E
E 2006 Nordson Corporation
BM200_EASY_GEAR
KeyCodeBox
Options
9 D Pressure‐controlled
10 P Profibus interface
11 6 Six additional heating channels (three additional receptacles)
12 J High drum jacket (for cardboard drums)
13 W Divided base plate (for pallet conveyance)
14 S Special
NOTE: Models with a piston pump are not described in this manual.
CAUTION: PUR material may be processed only in models with exhaust
hood and manual drum aeration valve!
ID Plate
ADHESIVE MELTER
BM
Nordson Engineering GmbH
Lilienthalstr. 6
D 21337 Lüneburg - Germany
www.nordson.com
Serial No:
3
4
5
1
2
Year
Fig. 2‐1
1 Melter designation
2 Order number
3 Configuration code
4 Electrical connection, operating voltage, line voltage frequency, melter fuse protection
5 Serial number