Nordson BM 200 - Section 2 Introduction; Intended Use and Restrictions

Introduction
2‐1
P/N 397189E
E 2006 Nordson Corporation
BM200_EASY_GEAR
Section 2
Introduction
Intended Use
Bulk melters in the series BM 200 with Gear Pumps - hereafter also referred
to as system - may be used only to melt and feed suitable materials. When in
doubt, seek permission from Nordson.
CAUTION: Only undamaged and suitable drums (Refer to Technical Data)
may be used.
CAUTION: PUR material may be processed only in models with exhaust
hood and manual drum aeration valve!
Any other use is considered to be unintended. Nordson will not be liable for
personal injury or property damage resulting from unintended use.
Intended use includes the observance of Nordson safety instructions.
Nordson recommends obtaining detailed information on the materials to be
used.
Unintended Use - Examples -
The systems may not be used under the following conditions:
S In defective condition
S With electrical cabinet door open
S In a potentially explosive atmosphere
S With unsuitable operating/processing materials
S When safety valves and pressure restrictor valves are not lead‐sealed
S When the values stated under Technical Data are not complied with.
The systems may not be used to process the following materials:
S Explosive and flammable materials
S Erosive and corrosive materials
S Food products.