Introduction
2‐13
P/N 397189E
E 2006 Nordson Corporation
BM200_EASY_GEAR
Heating Punch
The heating punch consists of the heating plate, the melting plate and
sealing rings.
NOTE: Models for cardboard drums have only the lower sealing ring on the
heating punch (configuration code: box 12 = J).
1
2
3
Fig. 2‐6
1 Heating plate 2 Sealing rings 3 Melting plate (if present)
Melting Plates
Depending on what the bulk melter is used for, one of these melting plates is
used. The melting plates are all release coated.
Axial melting plateFine‐blade melting plateSmooth melting plate
Fig. 2‐7
To Next Page
Loading...
