Installation
3‐1
P/N 397189E
E 2006 Nordson Corporation
BM200_EASY_GEAR
Section 3
Installation
WARNING: Allow only qualified personnel to perform the following tasks.
Observe and follow the safety instructions in this document and all other
related documentation.
Unpacking
Unpack carefully and check for damage caused during transport. Save pallet
and fastening and packing material for later use, or dispose of properly
according to local regulations.
Lifting (Unpacked System)
Refer to Technical Data for weight. Lift only with a suitable floor conveyor (lift
truck or fork lift).
Transport
S For systems with divided base plate:
CAUTION: Risk of damage! Do not move system without attaching
transport protection to the base plate.
S Refer to Technical Data for weight. Use only suitable transport devices.
S If possible, use the pallet on which the system was delivered, and fasten
the system to the pallet.
S Protect from damage, moisture and dust with suitable packing material.
S Avoid jolts and vibrations.
To Next Page
Loading...
