Nortel 5510 - Page 22

22 Chapter 1 General System Monitoring Considerations
logging remote level parameters
Parameters and
variables
Description
{critical | serious |
informational | none}
Specifies the severity level of the log messages
to be sent to the remote server:
•
critical
•
informational
•
serious
• none
no logging remote level command
The no logging remote level command removes any severity level
setting and reverts to None. The syntax for the no logging remote
level command is:
no logging remote level
The no logging remote level command is executed in the Global
Configuration command mode.
default logging remote level command
The default logging remote level command sets the severity level
of the logs sent to the remote server to the default value of None. The
syntax for the default logging remote level command is:
default logging remote level
The default logging remote level command is executed in the
Global Configuration command mode.
Configuring remote logging with the Java Device Manager
The Java Device Manager (JDM) also provides functionality for managing
remote logging. To configure remote logging, follow this procedure:
Step Action
1 Open the System Log screen by selecting Edit > Diagnostics >
System Log from the menu. Select the Remote System Log tab.
This tab is illustrated below.
Nortel Ethernet Routing Switch 5500 Series
Configuration - System Monitor ing
NN47200-505 03.01 Standard
5.1 27 August 2007
Copyright © 2005 - 2007, Nortel Networks
.