Nortel 5510 - LACP Tab

Graphing switch port data 59
Field Description
BackendResponses Counts the number of times that the
Backend Authentication state machine
sends an Initial-Access request packet to
the Authentication server.
BackendAccessChallenges Counts the number of times that the
Backend Authentication state machine
receives an Initial-Access challenge packet
from the Authentication server.
BackendOtherRequestsToSupplicantCounts the number of times that the
Backend Authentication state machine
sends an EAP request packet (other than
an Identity, Notification, failure, or success
message) to the supplicant.
BackendNonNakResponsesFromSupplicantCounts the number of times that the
Backend Authentication state machine
receives a response from the supplicant to
an initial EAP request and the response is
something other than EAP-NAK.
BackendAuthSuccesses Counts the number of times that the
Backend Authentication state machine
receives an EAP-success message from
the Authentication server.
BackendAuthFails Counts the number of times that the
Backend Authentication state machine
receives an EAP-failure message from the
Authentication server.
—End—
LACP tab
The LACP tab displays read-only Link Aggregation Control Protocol (LACP)
diagnostic statistics.
To view the LACP tab, follow this procedure:
Step Action
1
Open the Graph Port screen by selecting one or multiple ports on
the Device View and then selecting Graph > Por t from the menu.
The Graph Port screen opens.
2
Select the LACP tab. This tab is illustrated below.
Nortel Ethernet Routing Switch 5500 Series
Configuration - System Monitor ing
NN47200-505 03.01 Standard
5.1 27 August 2007
Copyright © 2005 - 2007, Nortel Networks
.