Configuring RMON with the CLI 93
Parameter Description
<1-65535>
The number of history buckets (records) to keep.
<1-3600>
The sampling rate (how often a history sample is
collected).
[owner <LINE>] Specify an owner string to identify the history entry.
The rmon history command is executed in the Global Configuration
command mode.
no rmon history
The no rmon history deletes RMON history table entries. When the
variable is omitted, all entries in the table are cleared.
The syntax for the no rmon history command is:
no rmon history [<1-65535>]
Substitute <1-65535> above with the unique ID of the history entry.
The no rmon history command is executed in the Global Configuration
command mode.
rmon stats
The rmon stats command configures RMON statistics settings.
The syntax for the rmon stats command is:
rmon stats <1-65535> <LINE> [owner <LINE>]
"rmon stats parameters" (page 93) outlines the parameters for this
command.
rmon stats parameters
Parameter Description
<1-65535>
Unique index for the stats entry.
[owner <LINE>] Specify an owner string to identify the stats entry.
The rmon stats command is executed in the Global Configuration
command mode.
no rmon stats
The no rmon stats turns off RMON statistics. When the variable is
omitted, all entries in the table are cleared.
The syntax for the no rmon stats command is:
Nortel Ethernet Routing Switch 5500 Series
Configuration - System Monitor ing
NN47200-505 03.01 Standard
5.1 27 August 2007
Copyright © 2005 - 2007, Nortel Networks
.
To Next Page
