Nortel 5510 - NN47200-505 03.01 Standard; Nortel Ethernet Routing Switch 5500 Series

72 Chapter 2 System Diagnostics and Statistics
show por t-statistics command
The show port-statistics command displays the statistics for the
port on both received and transmitted traffic, including the 10 GByte ports
(ports 25 and 26) on the 5530.
The syntax for the show port-statistics command is:
show port-statistics [port <portlist>]
The show port-statistics command is executed in the Privileged
EXEC command mode.
"show port-statistics parameters" (page 72) outlines the parameters for
this command.
show port-statistics parameters
Parameter Description
port <portlist> The ports to display statistics for. When no port
list is specified, all ports are shown.
show port-statistics examples
show port-statistics 12
clear-stats command
The clear-stats command clears all statistical information for the
specified port. All counters are set to zero (0).
The syntax for the clear-stats command is:
clear-stats [port <portlist>]
"clear-stats parameters" (page 72) outlines the parameters for this
command.
clear-stats parameters
Parameter Description
port <portlist> The port(s) to clear statistics for. If no port
is specified, the system defaults to the
port entered when entering the Interface
Configuration command mode.
show stack port-statistics command
The show stack port-statistics command displays port counters
including congestion and dropped packets on stacks of ERS 5500 series
switches.
The syntax for the show stack port-statistics command is:
Nortel Ethernet Routing Switch 5500 Series
Configuration - System Monitor ing
NN47200-505 03.01 Standard
5.1 27 August 2007
Copyright © 2005 - 2007, Nortel Networks
.