18 Chapter 1 General System Monitoring Considerations
System Log screen
2
In the System Log (View By) section, select the messages to be
displayed by selecting a value from the Display Messages From list.
3
Click Submit.
—End—
Messages can also be cleared from the log by selecting a value from the
Clear Messages From list and then clicking Submit. If messages are not
to be cleared, ensure that this list has None selected.
Configuring the system log with the Java Device Manager
The Java Device Manager (JDM) also provides functionality for managing
the system log. To configure the system log, follow this procedure:
Step Action
1
Open the System Log screen by selecting Edit > Diagnostics >
System Log from the menu. Select the System Log Settings
tab. This screen is illustrated in "System Log dialog - System Log
Settings tab" (page 19).
Nortel Ethernet Routing Switch 5500 Series
Configuration - System Monitor ing
NN47200-505 03.01 Standard
5.1 27 August 2007
Copyright © 2005 - 2007, Nortel Networks
.
To Next Page
