Nortel 5510 - Nortel Ethernet Routing Switch 5500 Series; NN47200-505 03.01 Standard

Configuring RMON with the CLI 91
rmon alarm parameters
Parameter Description
<1-65535>
Unique index for the alarm entry.
<WORD> The MIB object to be monitored. This is an object
identifier, and for most available objects, an English
name may be used.
<1-2147483647>
The sampling interval, in seconds.
absolute Use absolute values (value of the MIB object is
compared directly with thresholds).
delta Use delta values (change in the value of the MIB object
between samples is compared with thresholds).
rising-threshold
<-2147483648-
2147483647 >
[<1-65535>]
The first integer value is the rising threshold value. The
optional second integer specifies the event entry to
be triggered when the rising threshold is crossed. If
omitted, or if an invalid event entry is referenced, no
event will be triggered.
falling-threshold
<-2147483648-
2147483647 >
[<1-65535>]
The first integer value is the falling threshold value.
The optional second integer specifies the event entry
to be triggered when the falling threshold is crossed.
If omitted, or if an invalid event entry is referenced, no
event will be triggered.
[owner <LINE>] Specify an owner string to identify the alarm entry.
The rmon alarm command is executed in the Global Configuration
command mode.
no rmon alarm
The no rmon alarm command deletes RMON alarm table entries. When
the variable is omitted, all entries in the table are cleared.
The syntax for the no rmon alarm command is:
no rmon alarm [<1-65535>]
Substitute <1-65535> above with the unique ID of the alarm entry.
The no rmon alarm command is executed in the Global Configuration
command mode.
rmon event
The rmon event configures RMON event log and trap settings.
The syntax for the rmon event command is:
Nortel Ethernet Routing Switch 5500 Series
Configuration - System Monitor ing
NN47200-505 03.01 Standard
5.1 27 August 2007
Copyright © 2005 - 2007, Nortel Networks
.