Nortel 5510 - Ethernet Errors Tab

64 Chapter 1 General System Monitoring Considerations
Field Description
HCOutUcastPkts The number of packets that higher-level protocols
requested be transmitted that were not addressed
to a multicast address at this MLT. This total
number includes those packets discarded or
unsent.
HCInMulticastPkt The number of packets delivered to this MLT that
were addressed to a multicast address at this
sublayer. For a MAC layer protocol, this number
includes both Group and Functional addresses.
HCOutMulticast The total number of packets that higher-level
protocols requested be transmitted, and that were
addressed to a multicast address at this MLT,
including those that were discarded or not sent.
For a MAC layer protocol, this number includes
both Group and Functional addresses.
HCInBroadcastPkt The number of packets delivered to this MLT that
were addressed to a broadcast address at this
sublayer.
HCOutBroadcast The total number of packets that higher-level
protocols requested be transmitted, and that were
addressed to a broadcast address at this MLT,
including those that were discarded or not sent.
—End—
Ethernet Errors tab
The Ethernet Errors tab provides read-only statistical information about
Ethernet errors that have occurred on the selected Multilink Trunk.
To view the Ethernet Errors tab, follow this procedure:
Step Action
1
Open the MLT_LACP screen by selecting VLAN > MLT/LACP
from the menu. This screen will open with the Multilink Trunks
tab selected.
2
On this tab, select the row that represents the MLT to graph and click
the Graph button. The MLT Statistics screen will open.
3
Select the Ethernet Errors tab. This tab is illustrated below.
Nortel Ethernet Routing Switch 5500 Series
Configuration - System Monitor ing
NN47200-505 03.01 Standard
5.1 27 August 2007
Copyright © 2005 - 2007, Nortel Networks
.