Showing unit statistics 31
Field Description
Monitor Port Select the port that will act as the
monitoring port.
Port X In port-based configurations, choose the
first switch port to be monitored by the
designated monitor port. This port is
monitored according to the value "X" in the
Monitoring Mode field.
Port Y In port-based configurations, choose the
second switch port to be monitored by
the designated monitor port. This port is
monitored according to the value "Y" in the
Monitoring Mode field.
Address A In address-based configurations, type the
MAC address to monitor by the designated
monitor port. This address is monitored
according to the value "Address A" in the
Monitoring Mode field.
Address B In address-based configurations, type the
MAC address to monitor by the designated
monitor port. This address is monitored
according to the value "Address B" in the
Monitoring Mode field.
3
Click Submit.
The new mirroring configuration is displayed in Port Mirroring
Active section.
—End—
Showing unit statistics
The JDM allows you to see the statistics for each unit in a stack.
To see the statistics for a unit, open the Unit Stats tab by selecting Edit >
Unit > Unit Stats.
Unit Stats screen
Nortel Ethernet Routing Switch 5500 Series
Configuration - System Monitor ing
NN47200-505 03.01 Standard
5.1 27 August 2007
Copyright © 2005 - 2007, Nortel Networks
.
To Next Page
