NTI ENTERPRISE ENVIRONMENT MONITORING SYSTEM
55
Time Settings Description
Time Zone Enter the appropriate time zone
Enable Daylight Saving Apply a checkmark to have the time change according to Daylight Saving Time rules
Set Date Enter the system date in MM-DD-YYYY format
Set Time Enter the system time of day in hh:mm:ss format
Enable NTP Place a checkmark to enable the ENVIROMUX to automatically sync up with a time server via
NTP
NTP server If the NTP is enabled, enter the Domain Name or IP address of the NTP server
NTP Frequency Enter the frequency (in minutes) for the ENVIROMUX to query the NTP server (minimum is 5
minutes)
E-mail Time Stamp Place a checkmark to have the ENVIROMUX apply a time of day stamp in the alert message
sent via email
SMS Time Stamp Place a checkmark to have the ENVIROMUX apply a time of day stamp in the alert message
sent via SMS
Configuration Backup &
Restore
Choose file Browse for a saved configuration file to be restored to the ENVIROMUX. Upon selection, press
“Save” and the ENVIROMUX will restore the configuration settings and reboot. Allow 1 minute
before trying to reconnect and log in again.
Note: The IP address will be set to the IP address in the file and may be different
Note: Before overwriting the existing configuration, consider whether the existing
configuration should be saved first. If it will be saved, be sure to save the current
configuration file under a different name than the configuration file to be loaded.
Download Configuration File Click this button to save the configuration of the ENVIROMUX to a location on your PC. This
file can be restored using the “Choose file” field in the event you wish to return the
ENVIROMUX to a former state
Restore Defaults Click this button to restore the ENVIROMUX to the configuration settings it had upon receipt
from the factory. Be careful! This will erase all
user configuration settings. Upon
restoration, the ENVIROMUX will reboot. Allow 1 minute before trying to reconnect and log in
again. Confirmation is required.
Language Selection
Select Language Select between English and Japanese for the language to read the ENVIROMUX menus in.
Note: If “Restore Defaults” is used, the IP address will also be restored to its default address (192.168.1.21) with a login
name “root” and password “nti”. To restore the root password to “nti” without having to restore all default settings,
contact NTI for assistance.
To identify the IP address of the ENVIROMUX without restoring defaults, use the Discovery Tool (page 26).
This is particularly useful when preparing to make changes to the configuration that may provide unsatisfactory results. If the
configuration is saved in a file before changes are made, stepping backward and restoring the previous settings is as simple as
clicking on the file saved. Just be sure to remember the name of the file saved and where in the PC it was saved.
Default settings can also be restored using the “Restore Defaults” button on the front of the ENVIROMUX (see page 96).
Figure 60- Configuration Backup and Restore
To Next Page
Loading...
Need help?
General
