NTI ENTERPRISE ENVIRONMENT MONITORING SYSTEM
80
Reboot the System
The ENVIROMUX can be remotely rebooted by anyone with administrative privileges. To view the Reboot System page, select
Reboot in the Administration section of the main menu. Click the Reboot Now button to cause the ENVIROMUX to reboot.
This will disconnect any user and shut down all activity. Any configuration changes that were made prior to this action will be
made active.
Figure 88- Reboot System page
The message “System is rebooting, please wait..... “ will appear and after approximately 45 seconds the login screen will appear.
Log in to resume activity.
Figure 89- System is rebooting
Note: In the event of a power failure, using REBOOT will cause the ENVIROMUX to shut OFF.
Click on the “Reboot Now” button to shut down the ENVIROMUX in the event of a power failure or use the System Reset button
on the front of the ENVIROMUX. During a power failure, this will be the only way the ENVIROMUX can be shut OFF. The
battery backup will power the ENVIROMUX for up to 1 hour.
The power switch will only shut down the ENVIROMUX during normal operation. If the power switch is not shut OFF during a
power failure, when AC power has been restored the ENVIROMUX will power ON automatically.
To Next Page
Loading...
Need help?
General
