NTI ENTERPRISE ENVIRONMENT MONITORING SYSTEM
86
DESCRIPTION
Description Use the default description provided or enter the description you want to see on notifications
received.
OR Events
Available Events Select from the predefined available Events (Figure 90) to have OR logic applied to a triggered
Event
AND Events
Available Events Select from the predefined available Events (Figure 90) to have AND logic applied to a triggered
Event
Smart Alert Configuration
Logical Function Logical function to be applied to the output of the logical status of the OR and AND lists to
determine when a Smart Alert should be generated.
Options include OR, AND, XOR, NOR and NAND
Delay The amount of time the Smart Alert Event status must be in an alert condition before a Smart
Alert message is triggered. This provides some protection against false alarms. The Delay
value can be set for 0-999 seconds or minutes.
Return Delay The amount of time the Smart Alert Event status must have returned to normal condition before
a Smart Alert message is cleared. The Delay value can be set for 0-999 seconds or minutes.
Group Settings
Group#xx Assign the Smart Alert to any group 1 -8 (see also page 38)
Figure 96- Smart Alert configuration- continued
To Next Page
Loading...
Need help?
General
