NTI ENTERPRISE ENVIRONMENT MONITORING SYSTEM
3
MATERIALS
Materials included with the ENVIROMUX-16D kit:
• ENVIROMUX-16D Large Enterprise Environment Monitoring System
• Power Cord- country specific (2 power cords for model ENVIROMUX-16D-DP)
• 1-CB4306 USB2-AB-2M-5T 2 meter USB 2.0 male type A-male type-B transparent cable
• CT6182 DB9 Female-to-RJ45 Female adapter
• CT6488 DB9 Male-to-RJ45 Female adapter
• 2-CB4352 5 foot RJ45-to-RJ45 CAT5 patch cable
• CD containing a pdf of this manual, Quick Start Guide, an SNMP MIB file, and the NTI Discovery Tool
• Rack mount kit
Materials included with the ENVIROMUX-5D kit:
• NTI ENVIROMUX-5D Medium Enterprise Environment Monitoring System
• 1- PS4225 120VAC or 240VAC at 50 or 60Hz-9VDC/3A AC Adapter (excluded in ENVIROMUX-5D-48V(DP))
-OR-
1- PS4264 120VAC or 240VAC at 50 or 60Hz-9VDC/5A AC Adapter (ENVIROMUX-5D(B)-IND only)
• 1- Line cord- country specific (excluded in ENVIROMUX-5D-48V(DP))
• 1- CB4306 USB2-AB-2M-5T 2 meter USB 2.0 male type A-male type-B transparent cable
• 1- CT6488 DB9 Male-to-RJ45 Female adapter
• 1- CB4352 5 foot RJ45-to-RJ45 CAT5 patch cable
• CD containing a pdf of this manual, Quick Start Guide, an SNMP MIB file, and the NTI Discovery Tool
Materials included with the ENVIROMUX-2D kit:
• NTI ENVIROMUX-2D Small Enterprise Environment Monitoring System
• 1- PS4225 120VAC or 240VAC at 50 or 60Hz-9VDC/3A AC Adapter
• 1- Line cord- country specific
• 1- CB4306 USB2-AB-2M-5T 2 meter USB 2.0 male type A-male type-B transparent cable
• CD containing a pdf of this manual, Quick Start Guide, an SNMP MIB file, and the NTI Discovery Tool
Materials required for connection but not supplied:
• Cables required for connection:
Cat5 for RS485 sensors with RJ45 connectors wired to the TIA/EIA-568B standard (see page 121 for
specifications)
ENVIROMUX-2W-xx 2-wire sensor cables for dry contact sensors
• Cable required for Ethernet connection:
Cat5 cable with RJ45 connectors wired straight through (pin 1 to pin 1, pin 2 to pin 2, etc..)
• ENVIROMUX-TRMPLG Terminating Plug- one required if multiple ENVIROMUX-16D units will be cascaded using
the RS485 connection method (page 75)
See our webpage for the latest sensors available; http://www.networktechinc.com/environment-monitor-16d.html
Contact your nearest NTI distributor or NTI directly for all of your cable needs at 800-RGB-TECH (800-742-8324) in US & Canada
or 330-562-7070 (Worldwide) or at our website at www.networktechinc.com
and we will be happy to be of assistance.
To Next Page
Loading...
Need help?
General
