NuWave Brio - Operating Instructions; Basic Air Fryer Operation and Controls

17
Owner's Manual
OPERATING INSTRUCTIONS
Before Use:
1. Remove all the packaging materials.
2. Remove the glue and labels on the Brio.
3. Clean the Base Tray and Fry Pan Basket with Fry Pan Basket Net
thoroughly with hot water, a nonabrasive sponge, and a mild dish detergent,
or in the dishwasher, top rack only.
4. Wipe the insides and outside of the Brio with a wet cloth. Do not immerse
the Brio in water.
Note: This appliance cooks using hot air. DO NOT ll the Fry Pan Basket
with oil.
Operation Preparation:
1. Place the Brio on a level, even, and stable heat-resistant surface.
2. Place the Base Tray and Fry Pan Basket in the Brio.
3. Plug the Brio into a standard wall socket. The power plug is included
in the package.
Note: Do not cover or block the vent located on the back of the Brio. Doing so
can prevent proper ventilation and will adversely affect the cooking results.
Operation Functions - On/Off Function
1. Press "ON/OFF" once to turn the Brio on.
• The control panel will display “360F”, and "temp" indicating the
Brio is powered on. 360°F is the default temperature setting.
2. Press "ON/OFF" again to turn the Brio off. The LED light indicator
will remain lit above the last wattage used.
Wattage Function
The default wattage of the Brio is 1500 watts.
1. Press "ON/OFF".
2. To change the wattage, press "WATTS" once. The blue light will
illuminate above “600”, indicating that the Brio is now set
to 600 watts.
3. Press "WATTS" once more and the blue light above “900” will
illuminate. The Brio is now set to 900 watts.
4. Press "WATTS" again and the blue light above “1500” will
illuminate, indicating that the Brio is now set to the default
1500 watts.
Note: If the wattage is changed from the default 1500W to either
600W or 900W and the Brio is unplugged, the appliance will
remember the last wattage setting when plugged back in.
ON
OFF
WATTS