NuWave Brio - Care & Maintenance; Appliance Cleaning Procedures; Proper Storage Guidelines

29
Owner's Manual
CARE & MAINTENANCE
Cleaning
Clean the appliance after every use or in between a number of large batches.
The Fry Pan Basket and the Base Tray have a non-stick coating with a
stainless steel Basket Net. Do not use metal utensils or harsh abrasives when
cleaning as this can damage the coating.
1. Unplug the appliance and make sure it cools completely.
Note: Remove the Base Tray and Fry Pan Basket and place on a heat-
resistant surface to help cool the appliance quicker.
1. Use a damp cloth to wipe the outside of the appliance.
2. Clean the Fry Pan Basket and inside components with a nonabrasive
sponge, hot water, and mild detergent.
Note: If using the dishwasher for the Base Tray, Fry Pan Basket, and Fry Pan
Basket Net, it is recommended to use top rack only.
Tip: If there is residual food in the Base Tray and Fry Pan Basket, add some
hot water and let it soak separately for about 10 minutes for easier cleaning.
1. Clean the insides of the appliance with a nonabrasive sponge and
hot water.
2. Once cooled completely, clean the Fry Pan Basket, Fry Pan Basket Net, and
Base Tray with a soft cleaning brush to remove any lingering food.
Storage:
1. Unplug the appliance and let it cool down completely.
2. Make sure that all the parts are cleaned and dry.
3. Push the power cord into the storing capsule.
Fix the cord by inserting it into the cord
xing unit.
IMPORTANT - Do not immerse unit in water
or attempt to cycle through dishwasher.
The outer surface may be cleaned by wiping
carefully with a damp dishcloth or sponge.
Make sure unit has cooled completely prior
to cleaning.
WARNING
Any other servicing should be performed by an authorized
service representative.