NuWave Brio - Troubleshooting Guide

30
Owner's Manual
TROUBLESHOOTING GUIDE
PROBLEM: POSSIBLE CAUSE(S): RESOLUTION(S):
The Brio does
not work.
The appliance is not
plugged in.
Did not press "ON/
OFF" button.
Fry Pan Basket is not
in the Brio.
Insert the plug into an
appropriate grounded power
socket. Press "ON/OFF"
button after settings are
selected. Place the Fry Pan
Basket in the Brio.
The ingredients
fried in the Fry Pan
Basket are not
completely cooked.
Too many ingredients
were used. The cooking
temperature is too low.
The cooking time is
too short.
Remove some ingredients
from the Fry Pan Basket;
smaller batches are fried
more evenly. Fry at a higher
temperature. Set the Brio to
air-fry for a longer time.
The food is
fried unevenly.
Certain types of
ingredients need to be
shaken halfway through
the cooking time.
Ingredients that are on
the top need to be shaken
halfway through the
cooking time.
Fried snacks are not
crispy when they
come out of the Brio.
You used a type of
snack meant to be
prepared in a traditional
deep fryer.
Use snacks designed to
be baked in a traditional
oven, or lightly brush some
olive oil onto the snacks
beforehand for a
crispier result.
Cannot slide the Fry
Pan Basket into the
appliance properly.
The Fry Pan Basket is
overlled. The Fry Pan
Basket is not placed in
the Base Tray correctly.
Do not ll the Fry Pan
Basket more than 4/5 full.
Push the Fry Pan Basket
down into the Base Tray until
you hear a click.