Oce TDS400 - Océ TDS400 Users

18 Océ TDS400 User Manual
Océ TDS400 users
The Océ TDS400 has the following user types:
System administrator The Océ TDS400 system administrator installs and
makes the configuration for Océ TDS400. The system administrator defines
the printer-language settings, pen settings and Automatic Language Sensing
(ALS) settings. The system administrator can help the users who need to install
the printer drivers on their workstations. See Chapter 10, ‘Printer Supplies and
Maintenance’ on page 151 for complete information. The configuration
information is in the Océ TDS400 Connectivity Manual provided with the Océ
TDS400.
Key operator The Océ TDS400 key operator is responsible for the daily
maintenance of the Océ TDS400. The key operator replenishes toner when
necessary, loads media as needed and defines the default printer settings for
recurring print jobs. Also, the key operator defines all time settings, such as
panel time out and sleep mode time out. See ‘Océ Account Center’ on
page 145 for more information.
Repro operator The repro operator is responsible for the daily operations on
the Océ TDS400
. The Repro Operator settings are a subset of the Key Operator
settings. The Repro Operator has no rights to change settings in the Océ Settings
Editor. In the Océ Queue Manager and the Océ System Control Panel the repro
operator has the same user rights as the Key Operator and System Administrator.
Anonymous user Typically, an anonymous user on the Océ TDS400 can be
either a PC user who has remote access to the system through one or more
drivers (Windows
®
driver, AutoCAD® ADI/HDI or PostScript
®
) or the remote
applications (Océ Queue Manager, Océ System Control Panel and Océ
Settings Editor), or the print submission/print management applications, or a
user performing a copy job at the scanner.
Service operator The Océ TDS400 service operator is responsible for
installation and maintenance of the Océ TDS400.