Oce TDS400 - Introduction to Océ Scan Logic

74 Océ TDS400 User Manual
Introduction
‘Océ Scan Logic®’ is an option which enables you to scan a document and
send it to a specific directory on the network. It makes full use of Océ Image
Logic®, a quality enhancement technology. Enable Océ Scan Logic® through
a password in the Océ Settings Editor. A graphical user interface is supplied
with the ‘Océ Scan Logic®’ option.
Youscaninorderto:
■ Use the documents again
■ Archive the documents
■ E-mail the documents
■ Prints the documents at a later time
A scan is made at the Océ TDS400 scanner. On the scanner operator panel, you
select the resolution and the destination of the scan.
You can store a generated file on the controller (temporary store) or move the
scan towards a network destination.
With Océ View Station LT you can see the scanned documents later. Océ View
Station LT comes with the Océ Scan Manager application.
Note: The optional Graphical User Interface (GUI) on the controller and a
memory configuration of 256 Mb are required to use Océ Scan Logic®.