Oce TDS400 - Print the Demo Print

34 Océ TDS400 User Manual
Print the demo print
After the installation of the Océ TDS400, you can print the demo print, to
check the printer and the controller.
▼ Makeademoprint
1
Press the On-line key to put the printer off-line.
2 Select the ‘Print info’ item with the or key.
3 Press Next/select to enter the ‘Print info’ menu.
4 Select the ‘Demo print’ item with the or key.
5 Press Next/select to print the demo print.
6 Press On-line to put the printer on-line again to print the demo print.