Troubleshooting 189
Problems with the reinforcement unit
If a reinforcement unit is installed, the following errors can occur:
■ Paper jams
■ Tape jams
■ No reinforcement strips on the output
This section explains how these errors can be solved.
Paper jam in the reinforcement unit
▼ How to clear a paper jam
1
Open the cover of the transport to the First Fold delivery and remove all paper
inside (see Figure 111).
[111] Opening the cover of the folder transport section
2 Close the cover of the folder transport section.
3 Open the front door of the reinforcement unit (see Figure 112).
To Next Page
