Oce TDS400 - File Format

80 Océ TDS400 User Manual
File format
To define the internal order of the scanned files, select between TIFF (Tagged
Image File Format), CALS-I (Continuous Acquisition and Life Cycle support),
or PDF (Portable Document Format).
Within the ‘Tiff format’ option, you can define 9 different Tiff subformats. The
‘Organization’ and ‘Compression’ of the file are determined by the Tiff
subformat you select.
Organization
■ Stripped
■ Tiled
■ Raw
Note: Select ‘Stripped’ or ‘Tiled’ when you can use these organizations later.
Select ‘Raw’ in another case.
Compression
■ Group 4
■ Group 3-1D
■ None
Note: Select ‘Group 4’ or ‘Group 3-1D’ when you can use these compressions
later. Choose ‘None’ in another case.
Note: ‘Group 4’ or ‘Group 3-1D’ are compression methods which are best for
text and vector drawings. If you select these compressions to scan a photo with
many gray scales these compressions can cause a negative compression: the
file size increases instead of decreases.
▼ Select file format
1
Press the Output key to select ‘file’.
2 Press the Extra key.
3 Select ‘File format’ with the or key.
4 Press the key, to enter the ‘File format’ menu.
5 Select the required format or subformat with the or key.
6 Press the Confirm key.