Oce TDS400 - Page 199

The folder 199
▼ Set the folded package width
1
Press the On-line key on the printer operator panel.
2 Select ‘Folding’ with the or key.
3 Press the key to enter the ‘Folding’ menu.
4 Select ‘Package’ with the or key.
5 Press the key to enter the ‘Package’ menu.
6 Select ‘Width’ with the or key.
7 Press the key to enter the ‘Width’ menu.
Enter a range between 186 -230 mm in steps of 1 mm; default 210 mm.