4 Océ TDS400 User Manual
Configuration 38
Select a language 38
Network settings 38
Paper series 41
Clear set memory 41
Diagnostic mode 41
Status messages 42
Error messages 44
Menu structure of the printer 46
Chapter 3
Using the Océ TDS400 to Copy
Scanner operator panel 48
The keys 49
The display 50
Menu level indicator 51
Copy jobs 52
Turn on and turn off the Océ TDS400 scanner 53
Start the copy process 54
Make copies 54
Number of copies 55
Select the use of roll 1 or roll 2 or manual feed 56
Select the input mode 57
To copy sets 57
Specify the zoom factor 58
The exposure settings 58
Deliver originals after scanning 60
Enable automatic feed of the original 60
Define settings for the next original 61
Copy on pre-cut sheets 61
Stop a copy job 64
Set synchro or standard cut 64
Adjust the leading or the trailing strip 65
Mirror-image copies 67
Release original 67
Stamping 68
Menu structure of the scanner 71
Chapter 4
Using the Océ TDS400 to Scan-to-file
Introduction 74
Make a scan 75
To Next Page
Loading...
