Oceanic GEO - NORM No Decompression Dive Displays; NORM Decompression Dive Displays; NORM Violation Modes; NORM High PO2

132
• Set U Group (Utilities): Factory Settings:
Wet Activation (On/Off) On
Units (Imperial / Metric) Imperial
Safety Stop Time, Depth (Off/3/5 minutes, 10/15/20 FT, 3/4/5/6 M) 3:00 (min:)
Conservative Factor (On/Off) Off
Backlight Duration (0/5/10 seconds) :05 (sec)
Sampling Rate (2/15/30/60 seconds) 15 (sec)
• Serial Number
Factory set actual
NORM No Decompression Dive Displays:
• Main (default) - TLBG, Elapsed Dive Time (hr:min), Dive Time Remaining (hr:min), Current Depth
• Alternate - O2BG, Max Depth, Current PO2, FO2 Set Point
• Secondary - Day of Week, Temperature, Time of Day (hr:min)
• Safety Stop Main (default) - TLBG, Stop Depth, Stop Time (min:sec), Dive Time Remaining (hr:min), Depth
NORM Decompression Dive Displays:
• Main (default) - TLBG, Stop Depth, Stop Time (hr:min), Total Ascent Time (hr:min), Current Depth
• Alternate #1 - TLBG, Stop Depth, Elapsed Dive Time (hr:min), Total Ascent Time (hr:min), Current Depth
• Alternate #2 - O2BG, Max Depth, Current PO2, FO2 Set Point
• Secondary - Day of Week, Temperature, Time of Day (hr:min)
NORM Violation Modes (displays similar to Deco) - Conditional, Delayed, and Immediate/Violation Gauge
NORM High PO2 (1.20 to 1.60 ATA)
NORM High Oxygen Accumulation (300 OTU per dive / 24 hr)
GAUG Dive Displays:
• Main (default) - Mode graphic GAUG, Elapsed Dive Time (hr:min), Current Depth
• Alternate - Mode graphic GAUG, Elapsed Dive Time (hr:min), Max Depth
• Secondary - Day of Week, Temperature, Time of Day (hr:min)
SPECIFICATIONS (CONTINUED)