Oceanic GEO - SET NORM;FREE CONSERVATIVE FACTOR

56
• Pressing and releasing the A button momentarily (< 2 seconds) will save the
Safety Stop settings and/or advance to the SET CONS screen with the Set
Point flashing.
• Pressing the A button momentarily and repeatedly (< 2 seconds) will step
through the other SET U screens.
• Depressing the A and S buttons simultaneously for 2 seconds will save the
settings and revert back to the SET U screen.
• Depressing and holding the M button for 2 seconds or if no button is pressed
for a period of 2 minutes operation will revert to the NORM or GAUG SURF
MAIN screen.
SET NORM/FREE CONSERVATIVE FACTOR, information includes (Fig. 50):
> Graphic CONS
> TIME and NDC icons.
> Set Point ON (or OFF) flashing.
• Pressing and releasing the S button (< 2 seconds) will toggle
between ON and OFF.
• Pressing and releasing the A button momentarily (< 2
seconds) will save the setting and/or advance to the SET
BACKLIGHT DURATION screen with the Set Point flashing.
• Pressing and releasing the A button momentarily and
repeatedly (< 2 seconds each time) will step through the other
SET U screens.
• Depressing the A and S buttons simultaneously for 2
seconds will save the setting and revert back to the SET U
screen.
Fig. 50 - SET
CONSERVATIVE