Oceanic GEO - SET WET ACTIVATION; SET UNITS

54
SET WET ACTIVATION, information includes (Fig. 48):
> Graphic WET
> Set Point graphic ON (or OFF) flashing.
• Pressing and releasing the S button will toggle between
ON and OFF.
• Pressing and releasing the A button momentarily (< 2
seconds) will save the setting and/or advance to the SET
UNITS screen with the Set Point flashing.
• Pressing and releasing the A button momentarily and
repeatedly (< 2 seconds each time) will step through the
other SET U screens.
• Depressing the A and S buttons simultaneously for 2
seconds will save the setting and revert back to the SET U
screen.
• Depressing and holding the M button for 2 seconds or if
no button is pressed for a period of 2 minutes operation
will revert to the NORM or GAUG SURF MAIN screen.
SET UNITS, information includes (Fig. 48):
> Graphic UNIT
> Set Point, FT icon and F graphic (or M icon and C
graphic) flashing, with degrees icon.
• Pressing and releasing the S button will toggle between
Imperial (FT, F) and Metric (M, C).
Fig. 48 - SET UNITS
Fig. 47 - SET WET
ACTIVATION