Oceanic GEO - SET NORM;GAUG EDT ALARM

49
• Pressing and releasing the A button momentarily (< 2
seconds) will save the setting and/or advance to the SET
EDT ALARM screen with the Set Point flashing.
• Pressing and releasing the A button momentarily and
repeatedly (< 2 seconds each time) will step through the
other SET A screens.
• Pressing the A and S buttons simultaneously for 2 seconds
will save the setting and revert back to the SET A screen.
• Depressing and holding the M button for 2 seconds or if
no button is pressed for a period of 2 minutes operation
will revert to the NORM or GAUG SURF MAIN screen.
SET NORM/GAUG EDT (ELAPSED DIVE TIME) ALARM,
information includes (Fig. 43):
> Graphic EDT
> Set Point value (hr:min), flashing, with DIVE and TIME
icons.
• Pressing and releasing the S button momentarily (< 2
seconds) will increase the Set Point from 0:10 to 3:00
(hr:min) in 5 minute (:05) increments.
• Depressing and holding the S button will scroll through the
Set Points at a rate of 4 Set Points per second until it is
released.
• Pressing and releasing the A button momentarily (< 2
seconds) will save the setting and/or advance to the SET
TLBG ALARM screen with the Set Point flashing.
Fig. 43 - SET EDT
ALARM
FREE Mode has a
separate EDT Alarm.