Oceanic GEO - WATCH COUNTDOWN TIMER (HR:MIN)

25
If no button is pressed during a period of 2 minutes, the unit
will revert to the MAIN TIME screen.
WATCH COUNTDOWN TIMER (HR:MIN)
Pressing the M button momentarily 2 times (< 2 seconds each)
while the Local Default Time screen is displayed will access the
Countdown TIMER screen, displaying the remaining Count-
down Time (hr:min) if running, or OFF flashing (Fig. 16) and
the previously set Countdown Time (hr:min) if the set Count-
down started and has ended, or OFF (solid) and 0:00 if no
time was previously set.
Once set ON, a Countdown will run in the background until it
counts down to 0:00, or it is set OFF, or a Dive is made at
which time it will default to OFF and the value previously set.
When a set Countdown Time reaches 0:00, the Audible Alarm
will beep 10 times and the red LED warning light will flash.
• Pressing and releasing the S button (< 2 seconds) will
acknowledge and silence the Alarm.
• Pressing and releasing the S button (< 2 seconds) will
silence and acknowledge the Daily Alarm (if its set and it
sounds).
• Pressing the L button will activate the Backlight.
• Depressing and holding the M button for 2 seconds will
revert to the Local Default Watch Time screen (MAIN or
ALTERNATE TIME).
Fig. 16 - WATCH
COUNTDOWN TIMER
FREE Mode has
separate COUNT-
DOWN TIMER