70
Fig. 57 - LOG DATA 1
LOG DATA 1
information includes (Fig. 57):
> Alpha graphic NO-D, DECO, GAUG, or VIOL.
> TLBG with the maximum accumulation segment flashing,
others fixed up to end-of-dive accumulation. All segments
flashing for delayed and full violation.
> VARI - showing the maximum ascent rate maintained for 4
consecutive seconds during the dive.
> Temperature (minimum recorded that dive) and graphic F
(or C).
> Symbols DIVE and TIME and Elapsed Dive Time (hr:min).
> Symbols TIME and SURFACE.
> Pre-dive Surface Interval (hr:min), 10 - through 23 - for times
greater than 9:59 (hr:min), blank for Dive 1 of a series.
> Maximum Depth and symbols MAX and FT (or M).
> Symbol NITROX, if a NORM Nitrox dive, none if a NORM
AIR or GAUG dive.
Pressing and releasing the S button momentarily (< 2
seconds) button will advance to the LOG DATA 2 screen.
Depressing the M button for 2 seconds or if no button is
pressed during a 2 minute period operation will revert to
the NORM or GAUG SURF MAIN screen.
Pressing the S button will activate the Backlight.
To Next Page
Loading...
