CHAPTER 10
118
Appendices
The following error messages may be encountered when using the Odyssey
®
browser interface.
Scan Setup
Error Message:
Do not use [illegal character] for this name. It is a reserved
character.
Description:
Allowable characters are: underscores, dashes, periods and
alphanumeric characters including spaces.
Error Message:
The scan dimensions must be in cm.
Description:
The user entered a dimension that is not an integer.
Error Message:
Enter a name for the scan.
Description:
The name field for the scan is blank.
Error Message:
Select or enter a name for the group the scan belongs to.
Description:
The group field is blank.
Error Message:
The focus values must be between 0.0 and 4.0.
Description:
The user entered a number out of the valid range or a number
that is not valid.
Error Message:
You must select at least one channel to scan.
Description:
At least one channel needs to be checked.
Error Message:
Enter valid x dimensions. OR-- Enter valid y dimensions.
Description:
The dimensions that the user entered are out of range 0-25 cm.
Error Message:
The scan dimensions must be in cm.
Description:
The value entered is not a number.
Error Message:
Scanner is busy.
Description:
A scan is currently in progress.
Error Message:
Scan already exists.
Description:
Attempt to start a scan with a name that is already in the group.
Error Messages
To Next Page
