EasyManua.ls Logo

Odyssey LI-COR - Safety Interlocks

Odyssey LI-COR
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER 1
4
Operational Information
Safety Interlocks
The Odyssey
®
Infrared Imager has two safety interlocks that prevent
access to the laser when the instrument lid is opened during
operation.
Do not attempt to defeat these interlocks.
The interlocks
are located on the front of the instrument bezel as shown below.
Audible tones sound when the lid is opened and closed.
Chemical Safety
LI-COR Biosciences recommends that all biochemicals be handled
carefully, and that safe laboratory procedures be followed at all
times. Be aware of the hazards associated with any chemical before
using it.
The Odyssey Imager should not be used with any radioactive
materials.
The Odyssey Infrared Imaging System weighs approximately 33 kg
(72 lb). The system should be placed on a level laboratory bench that
is sufficiently sturdy to bear its weight.
Interlocks
Figure 1-3.
Placement in the Laboratory

Table of Contents

Related product manuals