3.2.b
Vertical handling of the oven
It is possible to rotate the oven vertically so that it
can pass through the doors.
• Lift the oven as indicated in the relevant paragraph.
• Place the oven on the suitable stand (1) and fix it with
the screws to the hinges (2). (Fig.7)
• Remove the chimney pipe (3). (Fig.7)
2
• Remove the stones from the floor (4). (Fig.7)
1
• Remove the chimney kit (5) by unscrewing the rel-
evant screws. (Fig. 8)
• Remove the two panels (6) and the crumb-collecting
grid (7). (Fig. 8)
• Unscrew and remove the two rear legs (8). (Fig. 8)
8
To Next Page
Loading...
